Security Metal Detection

GetData has partnered with CEIA, the leader in the development and production of metal detectors for industrial and security applications as well as for ground search.

The solutions offered include detection equipment and networking software which allow effective screening of people entering sensitive areas, at the inside of buildings and outdoors, with the purpose of preventing the entry of metallic weapons.
 

CEIA Metal Detectors offer efficient, reliable solutions for theft prevention (removal of precious metals, coins, electronic components and devices, ammunition etc.) and protection of data and technology.

The available/suggested models use latest generation electronic technology and comply with the most stringent

requirements for security and operational effectiveness and offer state of the art performance:

·         A wide range of user selectable sensitivity settings;

·         Detection of conventional and non-conventional weapons;

·         Increased throughput;

·         High discrimination of personal metal objects;

·         Increased immunity against outside interferences;

·         High reliability and durability.

Multi Zone Walk Through Metal Detectors  

HI-PE Multi Zone

High Performance Metal Detector

• Complete Security Detection

• Highly Visible Double Display provides Single or Multiple Location of Weapons in Transit

• Very High Speed of Detection

• High Immunity to External Interferences

• Direct Selection of the International Security Standards

• High Reliability

• Local or Remote Programming with Networking Capabilities

The HI-PE Multi Zone is a high performance walk-through Metal Detector which exceeds all International Security Standards.

A “height on person” display actually indicates, by means of illuminated LED’s, the position of the weapon on the person. Three operating modes are available: Floating (standard): the location zones are not fixed, as in the case of Metal Detectors with multiple receiver-transmitter coils, but are variable and continuous so as to achieve optimum resolution; 8-Zones and 4-Zones: the alarm threshold can be adjusted individually for each zone. The panels are washable and they are equipped with shock absorbent edges to protect them against damages.

Main Characteristics

• Immediate selection of International Security Standards.

• Detection of magnetic, non-magnetic and mixed alloys metal weapons.

• High detection speed: up to 15 m/s (45 ft/s).

• Very high immunity to both electrical and mechanical interference.

• Programmable operation controlled by microprocessor.

• Programming: via built-in keypad and display or RS-232 serial connection to Remote Control Unit (RCU2), PC or computer network.

• Programming access protected by a mechanical lock and two alphanumeric passwords.

• Cable-free automatic synchronization between two or more Metal Detectors at a minimum distance of 5 cm (2 inches) from each other.

• High-integration professional electronics and maximum reliability.

• Control unit incorporated into the detector.

• No need for initial or periodic calibration.

• Easy maintenance: modular control unit for a rapid replacement.

• Color: light grey RAL 7040.

PMD2 Multi Zone

Very High Performance Multi-Zone Metal Detector

• Uniform Detection Field

• Very High Discrimination

• Highly Visible Double Display provides Single or Multiple Location of Weapons in Transit

• Fast Programming through an Exclusive Chip Card System

• High Immunity to External Interferences

• Local or Remote Programming with Networking Capabilities

PMD2, acronym for Programmable Metal Detector, is the most advanced CEIA application with an international patent of its own. It generates an electromagnetic scanning field for the detection of metallic weapons inside a monitored passage. Thanks to this technology, the PMD2 Metal Detector allows weapons to be accurately located on people in transit, considerably speeding up search operations.

A “height on person“ display actually indicates, by means of illuminated LED’s, the position of the weapon on the person. The location zones are not fixed, as in the case of Metal Detectors with multiple receiver-transmitter coils, but are variable and continuous so as to achieve optimum resolution.

Use of the PMD2 ensures an extremely high level of discrimination of metal personal effects.

PMD2 can be supplied, on request, with two emergency batteries that automatically come into operation in the event of a power failure.

PMD2 is available in panel (PMD2/PTZ) or column (PMD2/ENZ) version. Also an outdoor column version, PMD2/EWZ, is offered with an IP65 degree of protection.

A photocell transit counter is available as an option. This will allow for statistical data to be accumulated on the persons passing through the detector. The detector’s control unit is incorporated into the structure. Access to programming is protected both by a mechanical lock and by two alphanumeric passwords. The PMD2 is manufactured using the most advanced electronics technology, conforming to ISO 9001 Quality Control Standard procedures.

Main Characteristics

• Detection of firearms in magnetic and non-magnetic metals and mixed alloys.

• High transit flow-rate thanks to the discrimination of metal personal effects.

• Direct selection of International Security Standards.

• Programmable operation controlled by microprocessor.

• Programming using incorporated keypad and display or via RS-232 serial connection by Remote Control Unit (RCU2), personal computer or computer network.

• Access to programming protected by mechanical lock.

• High detection speed: up to 15 m/s.

• High immunity to mechanical and electromagnetic interference.

PMD2 Elliptic Multi Zone

Very High Performance Multi-Zone Metal Detector

PMD2 Elliptic is a high performance walk-through Metal Detector which exceeds all International Security Standards. It has the same great specifications as the the PMD2 with Columns instead of Panels.

 

SMD600 Multi Zone

Ultra High Sensitivity Metal Detector

• Ultra High Sensitivity to all Metals

• Highly Visible Double Display provides single or multiple location of metal objects in transit

• Extremely High Reliability

• Very High Immunity to External Interferences

• Local or Remote Programming with Networking Capabilities

The CEIA SMD600 Multi Zone is a new-generation ultra-high sensitivity Walk-Through Metal Detector designed to satisfy the strictest security requirements, especially in penitentiaries and other applications where the detection of extremely small metal masses is required (for example: loss prevention), even if hidden in body cavities. It meets all International Security Standards currently adopted in public and private installations.

The SMD600 Multi Zone is characterised by very high immunity to electrical interference in the surrounding environment as well as mechanical vibrations; as a result, it can be installed in those environments where the standard Metal Detectors could not be installed before.

A full-height light bar displays the horizontal location of the detected metal masses in transit. This results in rapid identification of threat and a reduction, or elimination, of manual searches.

The Anti-Vandalism Control Unit (IP65 in stainless steel) is incorporated into the structure of the Metal Detector. Access to programming is protected both by a mechanical lock and by two alphanumeric passwords. The SMD600 Multi Zone is manufactured using the most advanced electronics technology, conforming to ISO 9001 Quality Control Standard procedures.

Main Characteristics

• Very high sensitivity for detection of small metal objects normally difficult to detect.

• Very high immunity to mechanical and electromagnetic interference.

• Control unit incorporated in the structure of the Metal Detector in anti-vandalism version (IP65 in stainless steel).

• Direct selection of International Security Standards.

• Programmable operation controlled by microprocessor.

• Programming using incorporated keypad and display or via RS-232 serial connection by Remote Control Unit (RCU2), personal computer or computer network.

• Access to programming protected by mechanical lock.

• High detection speed: up to 15 m/s.

• Automatic synchronization of two or more Metal Detectors at a reciprocal distance down to 5 cm without using cables.

• Professional high-integration, highly reliable electronics.

• No initial or periodic calibration.

• Easy maintenance: modular electronic control unit for easy replacement.

• Light grey color RAL 7040.

SMD 601 Multi Zone

The Most Advanced Multi-Zone Metal Detector for Law Enforcement and Correctional Facilities

• Very High Sensitivity to magnetic and non-magnetic metals and to stainless steel

• Complies with new Standard NIJ-0601.02

• Quick, accurate analysis of all parts of the body of people in transit

• Very accurate pinpointing of individual and multiple metal masses

• Extremely high level of immunity to electrical and mechanical interference

• Local or Remote Programming with Networking Capabilities

The CEIA SMD601TM is a Multi-Zone Walk-Through Metal Detector specifically designed to comply with the new NIJ Standard-0601.02 (U.S. Dep. of Justice). The Standard establishes new requirements of Sensitivity, Discrimination and Immunity for Law Enforcement and Correctional Facilities.

This is an extremely sensitive device for the detection of conventional weapons, such as pistols and knives, as well as small, hard-to-find items, normally difficult to detect, that could be considered a threat to officer and prisoner safety.

The three levels of Security specified by the Standard (Large, Medium and Small object size) are pre-loaded in the Metal Detector, and can be selected directly by the user via a simple operation at the control unit.

A full-height light bar displays the horizontal location of the detected metal masses in transit. This results in rapid identification of threat and a reduction, or elimination, of the need for manual searches. The Anti-Vandalism Control Unit (IP65 in stainless steel) is incorporated into the structure of the Metal Detector. Access to programming is protected both by a mechanical lock and by two alphanumeric passwords.

Main Characteristics

• Immediate selection (parameter IS) of Security Levels specified by NIJ Standard-0601.02.

• Additional Threat Levels selectable by Chip-Card.

• Detection of magnetic, non-magnetic and mixed alloys metal weapons.

• All functions programmable and controlled by a microprocessor.

• Photocell transit counter and automatic alarm rate calculation.

• Programming: via built-in keypad and display or RS-232 serial connection to Remote Control Unit (RCU2), a PC or a computer network.

• Programming access protected by both a mechanical lock and by two alphanumeric passwords.

• High speed of detection: up to 15 meters per second.

• Very high immunity to electromagnetic and mechanical interference.

• Automatic synchronization between two or more Metal Detectors, at a distance of down to 20 cm, from each other, without using cables.

• Professional high integration and high reliability electronics.

• Control unit incorporated into the detector.

• No initial or periodic calibration.

• Easy maintenance: modular control unit for a rapid replacement.

• Color: light grey RAL 7040.

Single Zone Walk Through Metal Detectors

Classic Metal Detector

• High Level of Detection Uniformity

• Leading Edge Technology

• Easy to Install and Use

• Suitable for Portable Applications

• No Maintenance Required

• Affordable Pricing

The Classic is a Walk-Through Metal Detector designed and engineered to meet the specific security needs of public facilities such as schools, hotels, amusement parks and city halls.

The Classic Metal Detector combines the required Security with a high level of operating efficiency. The leading edge technology features a high flow rate of people through the gate with the minimum number of nuisance alarms, as personal effects such as coins, keys and belt buckles can pass through the magnetic field without causing an alarm.

The Classic Metal Detector is compact and lightweight, making this portable unit adaptable to any surroundings. The patented cylinder design is aesthetically suitable for the most discrete applications.

This security equipment does not require any special training for normal use, making this the most ‘user friendly walk-through Metal Detector in the industry.

CEIA Metal Detectors have been selected by the leading security agencies worldwide to protect highranking government officials. The Classic conforms to all International Security Standards and is capable of detecting both magnetic and non-magnetic weapons.

When security, operating efficiency and affordable pricing are required, the CEIA Classic Metal Detector is the obvious solution.

Main Characteristics

• Digitally adjustable sensitivity with a wide range of values.

• All functions are controlled by a microprocessor.

• Programming access protected by hardware key.

• Automatic synchronization between two or more Metal Detectors, at a distance of down to 5 cm from each other, without using cables.

• Professional high integration and high reliability electronics.

• Control unit incorporated in the detector.

• No initial or periodic calibration.

• Easy maintenance. Modular control unit for a rapid replacement.

• Color: light grey RAL 7040.

 

 

Classic/Navy Metal Detector

The Classic/Navy is a Walk-Through Metal Detector designed and engineered to meet the specific security needs of facilities like Cruise Ship.

 

Main Characteristics

• Digitally adjustable sensitivity with a wide range of values.

• All functions are controlled by a microprocessor.

• Programming access protected by hardware key.

• Automatic synchronization between two or more Metal Detectors, at a distance of down to 5 cm from each other, without using cables.

• Professional high integration and high reliability electronics.

• Control unit incorporated in the detector.

• No initial or periodic calibration.

• Easy maintenance. Modular control unit for a rapid replacement.

• Color: light grey RAL 7040.

HI-PE/CF Elliptic

Very High Discrimination Metal Detector

• Digitally adjustable sensitivity with a wide range of values

• International Standards: Direct selection of the International Security Standards

• Very high discrimination

• Very high immunity to electromagnetic and mechanical interference

• All functions programmable and controlled by a microprocessor

• Programming: via built-in keypad and RDU or RS-232 serial connection to PC or computer network

• Programming access protected by both a mechanical lock and by two software level passwords

• Automatic synchronization between two or more Metal Detectors, at a distance of down to 5 cm, from each other, without using cables

• Professional high integration and high reliability electronics

• Electronic control unit separated from the archway

The transit of metal personal effects in common daily use through Metal Detector checkpoints generates signals which often exceed those of some types of fire-arm available on the market. Discrimination of these by the Metal Detector therefore becomes a necessary condition for establishing access systems with high flow rates.

As a solution to this problem, CEIA presents its new HI-PE/CF Elliptic Metal Detector which, with its detection functions based on an innovative signal analysis system, raises the threshold of discrimination between medium-sized fire-arms and personal effects to a level up to 400% above that of the 02PN8 HI-PE model.

The advantages of using this new Metal Detector are the following: a notable reduction in the need for branch staff to act to check inward- and outward-bound traffic; increase in convenience of access to the bank for customers; and, not least, the opportunity to increase the level of security.

Statistical data obtained in real operating situations with the HI-PE/CF Elliptic Metal Detector have demonstrated the almost total elimination of false alarms compared with earlier systems, at the same level of detection capability relating to fire-arms of conventional construction and in light metal.

Hand Held Detectors

Very High Sensitivity Enhanced Hand Held Metal Detector

• Very high sensitivity

• Detection of magnetic and non-magnetic metals

• Optical, acoustic and vibration alarm signals

• Very long battery life

• Rapid inductive battery charger

• Very high reliability

• Ease of use

• Automatic calibration

• Exclusive ergonomic shape

• Five different alarm tones and ten operating channels to allow easier use of several detectors in restricted space

The PD140SVR hand-held Metal Detector is a high-sensitivity device designed to detect magnetic and non-magnetic metal objects. The applications include detection of weapons, detonators and other small metal parts on people or in packages, luggage or correspondence.

The bidirectional detection head allows detection of metal on both sides, upper and lower.

The exclusive ergonomic shape ensures a secure grip, allowing rapid, thorough inspection operations with minimum discomfort for the persons being checked.

The device is supplied with a standard sample for checking calibration. Specific test samples can be supplied in line with the Security Regulations in force.

Three available models tailored to fit your specific needs, PD140SVR, PD140SV, PD140.

Shoe Analyzer

Notwithstanding the extremely high discrimination capability of last-generation CEIA walk-through Metal Detectors, a certain percentage of shoes containing significant metal masses still cause alarms during transit, and so have to be examined by security staff with another inspection system – usually the X-ray scanner – to ensure that there are no meal weapons hidden in them. This obviously causes inconvenience to the passengers in transit.

In the light of this new operational scenario, CEIA has developed the SAMD Shoe Analyzer to check shoes worn by passengers without having to remove them, employing low-frequency electromagnetic fields which are non-ionizing and completely harmless.

The SAMD Shoe Analyzer, which complies with the most recent, stringent security requirements, reduces by up to 10 times or more the number of shoes that must be examined manually.

Main Characteristics

• Automatic detection of metal weapons hidden in the shoe and up to calf height, with simultaneous discrimination of normal metal components in footwear

• Increase in passenger transit flow-rate

• Reduction of the cost of operators currently employed in the systematic examination of the shoes using X/ray equipment

• Greater comfort for passengers, with the virtual elimination of the inconvenience caused by taking off/putting on shoes and the related waste of time